Hunter 44100B User Manual

Hunter 44100B User Manual

Owners Manual Model 44100B

Congratulations!
Your new Climate Technology thermostat will provide years of reliable service.  Using this digital thermostat will provide more uniform comfort in your home through the seasons. Thank you for buying a Cli- mate Technology product!
Please read this manual for complete instructions on installing and operating your thermostat. If you require further assistance, call Cli- mate Technology Technical Support at 1-800-676-7861 from 8am to 5pm Central Time.

IMPORTANT INFORMATION

We are pleased you have selected one of our broad line of home comfort products. Our products are manufactured to high quality standards and are designed for years of service. We hope you will be satisfied and thank you for buying a Hunter product..

1. The thermostat is designed to work on the followinf systems:
   • Gas - Standing Pilot
   • Gas - ELectronic Ignitatiom
   • Gas - Fired Boilers
   • Gas - Milivolt Systems
   • Oil - Fired Boilers
   • Oil - Fired Furnace
   • ELectric Furnace
   • Electric Air Conditioning
2. Temperature Range - this thermostat can be programmed between 45°F and 95°F (7°C and 35°C), However, it will be display room temperatures from 30°F to 99°F (0°Cand 37°C), "HI" willbe displayed if the temperature is higher than 99°F (37°C), and "LO" will be displayed if the temperature is lower than 30°F (O°C). This thermostat will automatically cut-off in Heat mode if the temperature rises above 95°F (35°C), and automatically cut-off in Cool mode if the temperature drops below 45°F (7°C).
3. Compressor Protection - This Thermostat privides a 3.5 minute delay after shutting off the cooling system before it can be restarted. This feature will prevent damage to your compressor coused by rapid cycling. It does not prevent a rapid compressor restart due short power outages.
4. Battery Warning - Two fresh AA alkaline batteries should provide well over one year of service. However, when the batteries become drained, the low battery indicator will flash on approximately 1 minutes to change the batteries and keep thermostat clock and program settings. Once the batteries have become too low to ensure proper operation, your system will be turn off, and the display will be cleared except for flashing low Battery indicator on the LCD display.

Features

1. LCD Display: Show Time, Day, Temperature, Program Number, and other feature information as required
2. Low Battery Indicator: Rashes when batteries need to be replaced
3. System Switch: Switch for Heat, Cool, and Off
4. Fan Switch: Fan switch for Automatic or Continous fan operation
5. Battery Comp: artment: Front access alows easy insertion of two AA 1,5V batteries.
6. Reset: Press with a paperclip to reset the thermostat and return to power-up setting.
7. Up and Down Keys: Key for changing the temperature setting, also used for increasing and decreasing selection in the Time, Program, and Span Fungtions.
8. Day/Time Key: Used for entering the clock setting mode. Use with the Up and Down key to set the time and day.
9. Program Key: Used for entering and modifying Programs. Use with the UP and Down keys to ther set times and temperatures Press when in Clock Setting mode to select between 12 and 24 hour clock modes.
10. Hold / Return Key: Used for setting a permanent (Vacation) Hold, and for returninng to the normal display from Day & Time setting, programming, or span setting modes.

Installation

This thermostat includes two #8 slotted screws and two wall anchors for mounting to install this thermostat, should have the following tools and materials

• Slotted Screwdrivers
• small screwdriver
• hammer
• electric drill and 3/16" bit
• two 1,5 V (AA) size alkaline batteries

Wiring Diagram

Readmore and Download Hunter 44100B User Manual