Honeywell VisionPRO TH8000 Series Manual

Honeywell VisionPro TH8000 Manual

Honeywell VisionPro TH8000 Specifications

Below is a product description and manual description of the Honeywell VisionPro TH8000.

The Honeywell VisionPro TH8000 thermometer is a room heating and air conditioning device. It is designed to provide precise temperature control and energy efficiency by intelligently managing the HVAC system. The thermostat has a large backlit display that is easy to read and navigate.

The Honeywell VisionPro TH8000 Thermostat offers multiple program settings, allowing users to create customized temperature programs based on their daily routines. It also has a vacation mode, which allows users to change their routine when they are away from home. This heater is compatible with various HVAC systems and can be used up to 3 degrees of heating and 2 degrees of cooling. It has advanced features such as adaptive recovery, which learns the time it takes to reach the desired temperature and adjusts it, and precise comfort control, which keeps the temperature in the do 1 degree.

The Honeywell VisionPro TH8000 lamp also has a filter change reminder and a key lock feature, providing added convenience and security. It can be configured with different facades to match different types of interior design. Overall, the Honeywell VisionPro TH8000 thermostat is a reliable and efficient heating and cooling device, offering temperature control, compatibility with various HVAC systems, and features available height for precise comfort control.

Honeywell 8000 Terminal Designations

Conventional Terminal Letters:

R System power. Connect to secondary side of system transformer.
C Common wire from secondary side of transformer.
W 1st stage heat relay.
W2 2nd stage heat relay.
Y 1st stage compressor contactor.
Y2 2nd stage compressor contactor.
G Fan relay.
S1/S2 Optional outdoor/remote/discharge sensor.
U1/U1 Optional IAQ device

Heat Pump Terminal Letters:

R System power. Connect to secondary side of system transformer.
C Common wire from secondary side of system transformer.
Y 1st stage compressor contactor.
Y2 2nd stage compressor contactor.
E/Aux Auxiliary/Emergency heat relay.
G Fan relay.
L Heat pump reset (powered continuously when System is set to Em Heat; system monitor when set to Heat, Cool or Off).
O/B Changeover valve for heat pumps.
S1/S2 Optional outdoor/remote/discharge sensor.
U1/U1 Optional IAQ device

Readmore and Honeywell VisionPRO® TH8000 Series Installation Manual PDF