Honeywell TH6110D1005 User Manual

Honeywell TH6110D1005 Manual

Honeywell Focus Pro 6000 Series Fiture

Program Schedule

You can program four time periods each day, with different settings for weekdays and weekends. We recommend the pre-set settings (shown in the table below), since they can reduce your heating/cooling expenses by as much as 33%.
Wake - Set to the time you awaken and the temperature you want during the morning, until you leave for the day.
Leave - Set to the time you leave home and the temperature you want while you are away (usually an energy-saving level).
Return - Set to the time you return home and the temperature you want during the evening, until bedtime.
Sleep - Set to the time you go to bed and the temperature you want overnight (usually an energy-saving level).
NOTE: Leave and Return periods can be canceled on weekends.

Troubleshooting Honeywell Focus Pro 6000 Series

If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily.

Display is blank

• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
• Make sure fresh AA alkaline batteries (depending on model) are correctly installed (see page 6).

Heating or cooling system does not respond

• Press SYSTEM button to set system Heat (see page 2). Make sure the temperature is set higher than the Inside temperature.
• Press SYSTEM button to set system to Cool (see page 2). Make sure the temperature is set lower than the Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
• Wait 5 minutes for the system to respond.

Readmore and Download Honeywell TH6110D1005 Owner's Manual PDF