Honeywell T6 PRO Installation Manual
Honeywell TH6210U2001/U Spesification
Below is the product description and manual description of the Honeywell TH6210U2001/U.
The Honeywell TH6210U2001/U heater is a reliable and durable option for controlling the temperature in your home. Designed for use in the United States, it offers many features and functions to meet your heating and cooling needs. This heater has a clear, easy-to-read digital display, allowing you to program and adjust temperature settings. It provides both heating and cooling modes, making the best comfort all year round.
The Honeywell TH6210U2001/U heater is compatible with most HVAC systems, making it suitable for most homes. It supports heating and single-stage heating, as well as heat pump and heat addition systems. With its efficient temperature control, this thermostat helps maintain a consistent and comfortable indoor environment. It allows you to set the maximum temperature, which can be useful for energy saving purposes. In addition, this Honeywell thermostat has a battery backup to ensure that it continues to work if the power goes out. It also has a filter change reminder, letting you know when it's time to replace your HVAC system's air filter.
In general, the Honeywell TH6210U2001/U thermostat is a reliable, durable choice for controlling the temperature in your home. Its design and functionality make it a suitable choice for many homes.
Temperature Ranges
Heat: 40 °F to 90 °F (4.5 °C to 32.0 °C)
Cool: 50 °F to 99 °F (10.0 °C to 37.0 °C)
Working Ambient Temperature
32 °F to 120 °F (0 C° to 48.9 °C)
Operating Ambient Temperature
37 °F to 102 °F (2.8 °C to 38.9 °C)
Shipping Temperature
-20 °F to 120 °F (-28.9 °C to 48.9 °C)
Operating Relative Humidity
5% to 90% (non-condensing)
Physical Dimensions in inches (mm) (H x W x D)
4-1/16” H x 4-1/16” W x 1-5/32” D
103.5 mm H x 103.5 mm W x 29 mm D
Honeywell T6 PRO ELectrical Rating
Terminal |
Voltage (50/60Hz) |
Running Current |
W Heating |
20-30 Vac |
0.02-1.0 A |
W2 (Aux) Heating |
20-30 Vac |
0.02-1.0 A |
E Emergency Heat |
20-30 Vac |
0.02-0.5 A |
Y Compressor Stage 1 |
20-30 Vac |
0.02-1.0 A |
Y2 Compressor Stage 2 |
20-30 Vac |
0.02-1.0 A |
G Fan |
20-30 Vac |
0.02-0.5 A |
O/B Changeover |
20-30 Vac |
0.02-0.5 A |
L/A Input |
20-30 Vac |
0.02-0.5 A |
Honeywell T6 PRO Troubleshooting
If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily.
Display is blank
- Check circuit breaker and reset if necessary.
- Make sure power switch for heating & cooling system is on.
- Make sure furnace door is closed securely.
- Make sure fresh AA alkaline batteries are correctly installed (see page 3).
Heatin or cooling system does not respond
- Press Mode button to set system Heat (see page 7). Make sure the desired temperature is set higher than the inside temperature.
- Press Mode button to set system Cool (see page 7). Make sure the desired temperature is set lower than the inside temperature.
- Check circuit breaker and reset if necessary.
- Make sure power switch for heating & cooling system is on.
- Make sure furnace door is closed securely.
- Wait 5 minutes for the system to respond.
Temperature settings do not change Make sure heating and cooling temperatures are set to acceptable ranges:
- Heat: 40 °F to 90 °F (4.5 °C to 32.0 °C)
- Cool: 50 °F to 99 °F (10.0 °C to 37.0 °C)
“Cool On” or “Heat On” is flashing
- Compressor protection feature is engaged. Wait 5 minutes for the system to restart safely, without damage to the compressor.
Aux heat runs in cooling
- For heat pump systems, verify there is not a wire attached to W on UWP systems. See “Wiring heat pump systems” on page 5.
Cool runs with a call for heat
- For heat pump systems, verify there is not a wire attached to W on UWP systems. See “Wiring heat pump systems” on page 5.
Readmore and Download Honeywell T6 Pro Hydronic Programmable Thermostat Installation
Title |
: Honeywell T6 Pro Hydronic Programmable Thermostat Installation |
Format |
|
Pages |
: 44 Pages |
Language |
: English |
File Size |
: 6 MB |