Honeywell RTH9590 Wi-Fi User Manual

Honeywell RTH9590 Wi-Fi User Manual

Honeywell RTH9590 Wi-Fi Specifications

Below is a product description and manual description of the Honeywell RTH9590 Wi-Fi.

The Honeywell RTH9590 Wi-Fi thermometer is a programmable device that allows users to control the temperature of their home from the inside. It provides Wi-Fi connectivity and can be used via smartphone or web portal. The heater is ideal for those who want to regulate the temperature of their home from anywhere. This easy-to-install device comes with a clear and user-friendly touch screen.

The Honeywell RTH9590 Wi-Fi has a customizable display, allowing users to change the background color, text size, and font. It offers smart response technology that learns the heating and cooling patterns of the home to ensure the desired temperature at the right time. This heater can set the temperature according to the specified day and time, and it can also switch between heating and cooling mode if necessary. The Honeywell RTH9590 Wi-Fi heater is ENERGY STAR certified, making it a great choice for homeowners looking to save money on their energy bills. It features a quality construction, made of durable materials that guarantee optimum performance over time. The heater also provides a filter change reminder for optimal air quality. Overall, the Honeywell RTH9590 Wi-Fi thermostat is an affordable home automation device that offers a convenient and convenient way to adjust the temperature settings in the room.

Honeywell RTH9590 Connect wires

Important! C wire is required and is the power source. Without a C wire, your thermostat will not power up. View the Alternate Wiring videos at wifithermostat.com/videos
1.6a Starting with the C Wire, match the sticky tag on the wire to the terminal labels.
1.6b Straighten wire and gently slide into terminal hole until it clicks into place. (If you need to remove a wire, use a pen tip to press the terminal release and then pull the wire out.)
Note: Refer to the wiring picture you took in Step 1.2.
Tip: To make it easier to slide the wire into place, use a pen tip to hold down the terminal release.

1.6c In the image on the right, check the box next to each connection. You will use this checklist in Step 1.9.
1.6d Verify wire is firmly secured by gently pulling on wire.
1.6e Repeat steps a–d for all other wires.
1.6f Push any excess wire back into the wall opening after all wires are installed.
Note: The L terminal on the lower right is used only for Heat Pump systems.
Note: If the old thermostat for Heat Pump System has separate wires on Aux and E, use a wire nut to attach both wires to a separate wire. Slide this third wire into the W2-Aux/E terminal.

Connect the Wi-Fi network

After touching Done on the final screen of the initial set up (Step 1.9g), the thermostat displays an option to connect to your Wi-Fi network.

2.1a Touch Yes to connect the thermostat to your Wi-Fi network. The screen displays the message “Searching for wireless networks. Please wait...” after which it displays a list of all Wi-Fi networks it can find.
Note: If you cannot complete this step now, touch I’ll do it later. The thermostat will display the home screen. Complete this process by selecting MENU > Wi-Fi Setup. Continue with Step 2.1b.

2.1b Touch the name of the network you want to use. The thermostat displays a password page.
2.1c Using the keyboard, touch the characters that spell out your home network password.
2.1d Touch Done. The thermostat displays “Connecting to your network. Please wait...” then shows a “Connection Successful” screen.
Note: If your home network is not shown on the list, touch Rescan.
2.1e Touch Next to display the registration information screen.

Readmore and Download Honeywell RTH9590 Wi-Fi With Voice Control Manual PDF