Honeywell RTH9580WF Manual

Honeywell RTH9580WF Manual

Honeywell RTH9580WF Spesification

Below is a product description and manual description of the Honeywell RTH9580WF.

The Honeywell RTH9580WF is a heater that provides efficient and comfortable temperature control for the home. Designed to be user-friendly, it has a large touch screen that allows easy and intuitive use. The thermostat can be adjusted for desired temperature settings throughout the day, providing optimal comfort and energy savings. Equipped with a Wi-Fi connection, the Honeywell RTH9580WF allows remote control and monitoring of the thermostat from a smartphone or tablet. This feature allows users to adjust the temperature even when they are not at home, ensuring a comfortable temperature when they arrive. In addition, the thermostat's intelligent recovery feature learns how long it takes to reach the desired temperature and adjusts it, reducing energy consumption.

The Honeywell RTH9580WF is compatible with many heating, cooling and heating systems, making it suitable for most homes. It allows for easy installation and can be configured to connect to a home Wi-Fi network.

Honeywell RTH9580WF Features

With your new thermostat, you can:

• Connect to the Internet to monitor and control your heating/cooling system.
• View and change your heating/cooling system settings.
• View and set temperature and schedules.
• Receive alerts via email and get automatic upgrades.
• View outdoor temperature and humidity (requires Wi-Fi set up and registration)

Troubleshooting Honeywell RTH9580WF

Display is blank

• Check circuit breaker and reset if necessary.
• Make sure power switch at heating and cooling system is on.
• Make sure furnace door is closed securely.
• Make sure C wire is connected (see page 11).

Cannot change system setting to Cool

• Check that System Setup screen “Your thermostat controls” or “Your system type” is set to match your heating and cooling equipment (see page 65).

Fan does not turn on when heat is required

• Check that System Setup screen “Your fan control” is set to match your heating equipment (see page 66). “Wait” appears on the screen
• Compressor protection feature is engaged. Wait 5 minutes for the system to restart safely, without damage to the compressor.

Heat pump issues cool air in heat mode, or warm air in cool mode

• Check your setting for System Setup screen “Type of changeover valve” to make sure it is properly configured for your system (see page 66).

Heating or cooling system does not respond

• Touch SYSTEM to set system to Heat. Make sure the temperature is set higher than the Inside temperature.
• Touch SYSTEM to set system to Cool. Make sure the temperature is set lower than the Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating and cooling system is on.
• Make sure furnace door is closed securely.
• If “Wait” is displayed, the compressor protection timer is on. Wait 5 minutes for the system to restart safely, without damaging the compressor (see page 59).

Heating system is running in cool mode

• Check that System Setup screen “Your thermostat controls” or “Your system type” is set to match your heating and cooling equipment (see “System Setup Options (MENU > System Setup)” on page 65).

Readmore and Download Honeywell RTH9580WF Manual