Honeywell RTH7460D1000/U Manual

Honeywell RTH7460 Programmable Thermostat Manual

Specifications Honeywell RTH7460D1000/U

Below is a product description and manual description of the Honeywell RTH7460D1000/U.

The Honeywell RTH7460D1000/U heater is a device designed for room temperature control. It is designed for use in the en_US region. This thermostat gives users the ability to set and adjust the room temperature they want. Featuring a user-friendly interface, the Honeywell RTH7460D1000/U allows for easy programming and configuration. It offers a 5-1-1 schedule every day, allowing users to set different times for weekdays, Saturdays and Sundays. This feature provides flexibility for those with different schedules during the week.

The flashlight includes a large backlit display, making it easy to read and navigate even in low light conditions. This ensures a clear view of the temperature setting and other important information. The Honeywell RTH7460D1000/U is compatible with many heating and cooling systems, including gas, electric and heat pumps. It can support up to twice as much heating and twice as much cooling, providing accurate control of indoor temperature values.

In addition, this thermostat offers advanced features such as Adaptive Smart Recovery, which ensures that the desired temperature is reached at a predetermined time. Accurate temperature control helps improve energy efficiency and reduce heating and cooling costs.

With its durable construction and reliable performance, the Honeywell RTH7460D1000 / U thermostat is a reliable choice for homeowners looking for safe and comfortable temperature control in their homes.

System operation settings

1. Press the Mode button to cycle to the next available System mode.
2. Cycle through the modes until the required System mode is displayed and leave it to activate.

NOTE: Available System modes vary by model and system settings.

System modes:

• Auto: Thermostat selects heating or cooling as needed.
• Heat: Thermostat controls only the heating system.
• Cool: Thermostat controls only the cooling system.
• Em Heat (only for heat pumps with auxiliary heat): Thermostat controls Auxiliary Heat. Compressor is not used.
• Off: Heating and cooling system is off. Fan will still operate if fan is set to On or Circulate.

NOTE: Heat/Cool flash for 5 minutes due to compressor protection.

Fan operation settings

1 Press the Fan button to cycle to the next available Fan mode.
2 Cycle through the modes until the required Fan mode is displayed and leave it to activate.
NOTE: Available Fan modes vary with system settings.

Fan modes:

• Auto: Fan runs only when the heating or cooling system is on.
• On: Fan is always on.
• Circ (RTH7500 Only): Fan circulates randomly about 33% of the time.

Program Schedule

You can program four time periods each day, with different settings for weekdays and weekends. We recommend the pre-set settings (shown in the table below), since they can reduce your heating/cooling expenses.

• Wake - Set to the time you wake up and the temperature you want during the morning, until you leave for the day.
• Away - Set to the time you leave home and the temperature you want while you are away (usually an energy-saving level).
• Home - Set to the time you return home and the temperature you want during the evening, until bedtime.
• Sleep - Set to the time you go to bed and the temperature you want overnight (usually an energy- saving level).

NOTE: To temporarily or permanently override any of the above program schedules, see page 12.

To adjust program schedules

1. Press Menu on your thermostat.
2. PROG is displayed. Press Select. Then ON is displayed. Press Select.
3. Press + or - to select day or set of days to edit. Press Select.
4. Press + or - to select a schedule period to edit (Wake, Away, Home, and Sleep). Press Select.
5. ON is displayed. Press Select to keep the schedule period on. Or press + and then Select to turn off the schedule period.
6. Time starts blinking. Press + or - to adjust the schedule period start time. Press Select.
7. Temperature starts blinking. Press + or - to adjust the “Heat” setpoint temperature. Press Select. Press + or - to adjust the “Cool” temperature setpoint. Press Select.
8. Repeat steps 4 through 7 for the remaining schedule periods.
9. Press Home when you’re finished to save program settings and return to the home screen.

Readmore and Download Honeywell RTH7460 Manual PDF