Honeywell RPLS731B, RPLS730B User Manual

Honeywell RPLS730B1000 Specifications

Below is a product description and manual description of the Honeywell RPLS730B1000.

The Honeywell RPLS730B1000 is an electronic switch that allows users to control their home's lighting system. It is designed for use with incandescent lamps up to 1,800 watts, fluorescent lamps up to 1,200 watts, and motor loads up to 1 horsepower. The switch has a large rear screen that shows the time, date and operating status. It offers seven possible options, including one that allows users to set a switch to turn their lights on or off at dawn or dusk.

The Honeywell RPLS730B1000 switch is compatible with single pole and three-way devices, meaning it can be used to control lights from multiple switch points. It also has a random mode option, which turns the lights on and off at different times to give passers-by a comfortable and realistic look.

The Honeywell RPLS730B1000 switch is easy to install and comes with detailed instructions. It requires 120 volt power and can be plugged into a standard electrical box. Its elegant, modern design matches most decors and enhances the beauty of any home. Overall, the Honeywell RPLS730B1000 is an efficient and useful light source that helps users save energy, reduce costs, and improve the comfort and safety of their homes.

POWER-ON

  1. Pry the switch door open from the bottom  using a small screwdriver.
  2. Ensure the ON/OFF selector is set to ON.
  3. Reset the switch using a paper clip. 0:00 will flash.

If the display is blank:

  • Ensure the ON/OFF selector is properly  engaged in the ON position. Push it to the right  using a small screwdriver.
  • At first power-up after the installation, the screen of the switch may be blank or dim, or become so when you turn the light on. However, during that time, the switch is fully functional. Wait 2 minutes for the switch’s built-in battery to be sufficiently charged and the screen will  return to its normal contrast.

SETTING THE CLOCK
NOTE: The switch displays the time in 24-hour format by default or follow-ing a reset.

  • To change to 12-hour format (or vice versa), proceed as follows:
    • Press one of the control buttons to ensure the MAN or AUTO  indicator is displayed.
    • Press the MIN and HOUR buttons simultaneously and briefly (0:00  display = 24-hour, 12:00 display = 12-hour).
  • Set the time using the HOUR and MIN buttons. If you have selected  the 12-hour format, ensure that PM appears on the screen when an  afternoon time is displayed.
  • Set the day using the DAY button.
  • Press one of the control buttons or close the switch door to return to  normal operation.

SELECTING THE OPERATING MODE

The programmable switch has 2 operating modes: manual (MAN) and automatic (AUTO). To switch mode, press the switch door for 3 seconds.

Manual mode

The programmable switch operates as a regular switch. Briefly press the switch door to turn the lights On or Off. The mode (MAN) and state (ON or OFF) are displayed.

Automatic mode

The programmable switch follows the programmed schedule. The mode (AUTO), state (ON or OFF) and  current program number are displayed. To temporarily override the programmed schedule, briefly press the switch door. The new state (ON or OFF) will flash to show  that this state is temporary. The override remains in effect until you press the switch door again or until the beginning of the next  program.

PROGRAMMING THE SCHEDULE

You can set up to 7 programs. To set a program, you need to enter its start
time (ON) and its end time (OFF).
  1. Pry the switch door open using a small screwdriver.
  2. Press the PGM button to display a program and its On or Off time. For example, when you first press PGM, program number 1 (P1) and its On time (ON) will appear. - : - - will appear instead of the time if the program is not set (inactive).
  3. Press the DAY button to select the day to which you want to apply the program.
  4. NOTE: If you want to apply the program to every day of the week, press DAY until all the days are displayed. (This still counts as 1 program, not 7)
  5. Press the HOUR and MIN buttons to set the ON time (time when you want the lights to turn on). If you have selected the 12- hour format, ensure that PM appears on the screen when an afternoon time is displayed.
  6. After you have programmed the ON time, press the PGM button to display the OFF time (time when you want the lights to turn off).
  7. Repeat steps 3 through 5 to program the OFF time. If the program ON time is set for every day of the week, the program OFF time will automatically be set for every day.
  8. To set another program, repeat steps 2 through 6.Programs that are not set will remain inactive.
  9. Press one of the control buttons or close the switch door to return tonormal operation.

Clearing a programmed time

Press the PGM button as many times as needed to display the programmed time. Hold the PGM button for 3 seconds. - : - - appears when the programmed time is erased. 

TROUBLESHOOTING

  • Blank display
  • Verify circuit breaker at main panel.
  • Ensure the ON/OFF selector is at ON.
  • Reset the switch using a paper clip.
  • Faded or irregular display
  • Ambient temperature below freezing point
  • Cannot switch between 24-hour format and 12-hour format
  • First, press one of the control buttons so that
  • MAN or AUTO appears on display.
  • Programs do not run as expected
  • Make sure the switch is properly programmed.
  • Note that - : - - indicates an inactive program. If the switch has been configured for 12-hour  format, check that PM appears on the left side of  the screen when an afternoon time is displayed.
  • The switch resets itself without apparent reason when used to control an inductive load such as a relay or a contactor.
  • The reset is caused by the load. Install a snubber (AC130-03) at each relay/contactor

Readmore and Download  Honeywell RPLS731B, RPLS730B Thermostat Manual

Title

Honeywell RPLS731B, RPLS730B Thermostat Manual

Format

PDF

Pages

6 Pages

Language

English

File Size

1 MB