Honeywell McDonald’s HEMS II Manual Overview
McDonald’s HEMS II Energy Management Control System & User Interface The McDonald’s HEMS II energy management and control system runs on a WEB -201™ (Java Application Control Engine). TheWEB -201 is a compact, embedded controller/server platform. It combines integrated control, supervision, data logging, alarming, scheduling and network management functions with Internet connectivity and web serving capabilities in a small, compact platform. The WEB -201 makes it possible to control and manage external devices over your local network or the Internet and present real-time information to users in web-based graphical views.
The HEMS II system is complete in a 36” X 24” X 4” stainless steel panel with a local touch screen operator interface display. All system set points and changes can be made from this local display. With internet access provided to the HEMS II, all information and set points are available remotely from any PC browser interface.
Honeywell McDonald’s HEMS II The system is designed to monitor and/or control the following items:
- (3) Roof Top Mounted HVAC Units.
- Freezer/Cooler Temperatures and associated Door Opened/Closed status.
- Outdoor air temperature.
- HVAC Unit Space Temperatures, Discharge Air (supply) Temperatures and Room Temperature Set Points.
- Electrical Demand and Electrical Consumption.
- Parking Lot Lights, Exterior Signage Lights, Customer (Dining Area) Lights.
- Employee/Kitchen Lights and Play Place Lights (if present).
- Outdoor Light Level from a Photocell.
Your installed system may have additional points of control or monitoring that are not covered or included in this document. Additional points could be:
- Drive through heater control.
- Kitchen equipment monitoring.
- Interface to your security system for status.
- Water heater control.
- Additional Roof Top Mounted HVAC/Units.
- Bulk CO2 levels near beverage and CO2 storage tanks.
- Or additional monitoring & control points that have been customized for your facility.
Navigation to Login Page from Local or Remote Personal Computer location
To begin: First open your internet browser and enter the WEBs Unit IP address in the "address bar". The WEBs Unit IP address will be furnished to you by the installer of the system. Additionally, you may consider installing a short cut icon on your personal computer Desk Top that will direct you to the IP address of your system.
Login Page
The Login Page is where you enter your username (user) and password (pass). Then click the login icon. Please wait until the booting process completely loads, once it does, it will automatically route you to the Home Page. Note that the first time you access your system from any browser it could take several minutes to load the Home Page. Subsequent access to the system, from the same Personal Computer will load the Home Page must faster.
Below is the default Login Page from the Local Touch Screen located on the front of panel after unit has been powered “ON”or after the blank screen has been touched and unit returns to normal operation mode from power saving standby mode.
Login Page
The Login Page will be automatically populated with the Username & Password. Touch the Login icon once and the system will automatically route you to the Home Page.
Home Page
The Home Page will display your systems current conditions with any active alarms.
Home Page – continued
This area of Home Page shows the following:
- Your store number and physical location.
- Current outside air temperature. By touching or clicking on the CYAN colored area you will be directed to a trend log of accumulated outside temperature data. See page 18 of this document for more information on this.
- Current time and date in the control system.
- By touching or clicking on “Operating Instructions” icon you will be presented with a complete description and use of each section of displays and completed system electrical drawings and written sequence of operations. See pages 20-27 and 28-37 of this document for more information on this.
Readmore and Download Honeywell McDonald’s HEMS II Manual
Title |
: Download Honeywell McDonald’s HEMS II Manual |
Format |
|
Pages |
: 37 Pages |
Language |
: English |
File Size |
: 3 MB |