Honeywell MagicStat 32 Manual

Honeywell MagicStat 32 User Manual

Welcome to the world of comfort and energy savings with your new Honeywell Programmable Thermostat. Your new thermostat will automatically control the temperature in your home, keeping you comfortable while saving energy.

Honeywell MagicStat 32 Specifications

Below is a product description and manual description of the Honeywell MagicStat 32.

• Weekday/Weekend (5-day/2-day)
• Programmable Heat and/or Cool
• Low Voltage (20 to 30 Vac)
• Thermostat and Mounting Plate
• Model CT3200

The Honeywell MagicStat 32 is a heater designed to provide effective temperature control in residential and commercial environments. With its elegant and compact design, it will easily fit into any decor.

MagicStat 32 provides precise temperature values, allowing users to precisely set their preferred temperature. It has a clear, easy-to-read digital display, making it easy to navigate and adjust settings. With its programmable capabilities, users can adjust temperature changes based on their daily routines, improving energy efficiency and reducing operating costs. This heater is compatible with many heating and cooling systems, including gas, oil, electric and heat pump systems. It also offers a rest mode, which allows users to save energy when they are away. The installation of MagicStat 32 is easy and can be attached to the wall or placed on the table. It requires simple wiring connections to the heating and cooling system, making the installation process hassle-free. With reliable performance and durable construction, the MagicStat 32 is built to last. It is designed for everyday use and provides long-term reliability. Overall, the Honeywell MagicStat 32 is a reliable and efficient thermostat that offers temperature control and energy savings. With its user-friendly features and durable design, it is a popular choice for residential and commercial applications.

Special Wiring Instructions

Clock thermostat with C or C1 terminals

A clock thermostat has one or two extra wires attached to the C or C1 terminals that allow the clock to operate. These wires are not used during the installation of your new 3200 Thermostat and must be insulated from each other to avoid damaging your electrical circuit.

1. Make sure that power to the heating/cooling system is turned off.
2. Locate the wires that are connected to the clock terminals marked C or C1.
3. As you disconnect the wires, do not allow these wires to touch.
4. Wrap the wires separately, using electrical tape to insulate the wires.
5. Place the wires where they do not interfere with the operation of the new thermostat. You will not connect these wires to your 3200 Thermostat.
6. Continue with the installation

Six or more wires

If your old thermostat has six or more wires (excluding clock wires attached to the C or C1 terminals), your heating/cooling system is most likely a variation of a heat pump or multistage system. Your 3200 Thermostat will NOT work with such systems and should be returned to the place of purchase. See the thermostat compatibility table for information about which programmable thermostat will work with your system.

Three thermostat wires

If you have three wires for heating only and can operate the fan using the fan ON switch, the 3200 Thermostat will work with your system. Continue the installation procedure. If you have a three-wire heating-only system and cannot operate the fan using the fan ON switch, the 3200 Thermostat will probably NOT work with your system. Contact your heating contractor for installation assistance.

Wires that are not connected to old thermostat

If there are extra wires that do not connect to your old thermostat, do not label them. You will not connect these wires to your new thermostat. Tape off the wires individually with electrical tape and place them where they will not interfere with the operation of the new thermostat. Continue the installation procedure.

Readmore and Download Honeywell MagicStat 32 User Manual