Honeywell FocusPRO TH5000 Manual

Honeywell FocusPRO 5000 Series User Guide

Honeywell FocusPRO 5000 Fiture

1. Honeywell FocusPRO 5000 With Auto changeover (heat/cool)
2. Honeywell FocusPRO 5000 Built-in compressor protection
3. Honeywell FocusPRO 5000 Battery replacement

Honeywell FocusPRO 5000 Troubleshooting

If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily.

1. Display is blank
   • Check circuit breaker and reset if necessary.
   • Make sure power switch at heating & cooling system is on.
   • Make sure furnace door is closed securely.
   • make sure fresh AA or AAA alkaline batteries (depending on model) are correctly installed (see page 3).
2. Heating or cooling system does not respond
   • Press SYSTEM button to set system Heat (see page 2). Make sure the temperature is set higher than the Inside temperature.
   • Press SYSTEM button to set system to Cool (see page 2). Make sure the temperature is set lower than the Inside temperature.
   • Check circuit breaker and reset if necessary.
   • Make sure power switch at heating & cooling system is on.
   • Make sure furnace door is closed securely.
   • Wait 5 minutes for the system to respond.
3. Temperature settings do not change
   • Make sure heating and cooling temperatures are set to acceptable ranges:
   • Heat: 40° to 90°F (4.5° to 32°C).
   • Cool: 50° to 99°F (10° to 37°C).
   • Cool On” or “Heat On” is flashing
   • Compressor protection feature is engaged. Wait 5 minutes for the system to restart safely, without damage to the compressor (see page 3).

Readmore and Download Honeywell FocusPRO® 5000 Series User Guide Manual PDF Below