Honeywell AQ1000TP2 User Manual
Description
The AQ1000TP2 thermostat is used to control the ambient air temperature or floor temperature in hydronic heating applications. It communicates with and is powered by an AQ2000 series zoning module to provide zoning control.
Product Features:
- 2-wire polarity-insensitive programmable network communicating thermostat
- Liquid crystal display, with 7 user buttons for programming
- Floor temperature sensing with minimum and maximum limits (when used with optional AQ12C20 Slab/Floor Sensor – sold separately)
- 7-day programmable
- Single-stage Heating and Cooling
- Outdoor, indoor, and floor temperature display
- Selectable temporary and permanent backlit
Product Specifications:
- Programmable Heat/Cool Thermostat
- Application: Hydronic single-stage zoning, heating and cooling
- Type: 2-wire Communicating Thermostat
- Type of Control Provided: Proportional Integral (PI)
- Network Zoning: Yes
- Network Bus: Low voltage, Class II, 2-wire polarity-insensitive, digital communicating link to AQ2000 series zoning modules.
- Zones: Single or Multi-zone
- Power Method: Powered (24 Vdc) by AQ zoning module
- Programmability: 7 Day Programmability
- User Interface (Programming): LCD Display and 7 user programming buttons
- User Interface (System Configuration):DIP Switches
- LCD Icons Displayed (Mode):Heat on
- LCD Icons Displayed (Mode):Comfort/Unoccupied
- LCD Icons Displayed (Mode): Keypad Lock
- LCD Icons Displayed (Mode):Setpoint
- LCD Icons Displayed (Mode):Cool On
- LCD Icons Displayed (Mode): Fan On
- Color: Premier White
- Mounting: Vertical Mount
- Temperature Control Mode Selections: “A” for Ambient Air, “F” for Floor, “AF” for Ambient & Floor.
- Temperatures Displayed: Indoor, Set Point, Outdoor
- Setting Temperature Range (F): 40 F to 100 F
- Floor Temperature Limit Range (AF Model) (F): 40 F to 100 F
- Differential Temperature (F): ± 1 F
- Outdoor Temperature Display Range (F): -58 F to 149 F
- Temperature Display Interval (F): +/- 1.0 F
- Temperature Range, Storage (F): -20 F to 130 F
- Operating Humidity Range (% RH): 5 to 90% RH, non-condensing
- Sensor Element: Thermistor
- Sensors (Floor) Used: 10 kilohm NTC thermistor at 25 C (77 F) +/- 0.5F (+/-0.3C) up to 500 ft (150 M) using 18 AWG or larger wire, beta=3892. Lead Length: 10 ft. (3050 mm).
- Floor Sensor Temperature Rating (F): -58F to 230F
- Electrical Connections: Wire-clamp screw terminals
- Terminal Designations: TH, TH, Sensor, Sensor
- Dimensions (in.): 3.0 in. wide x 4.9 in. high x 1.0 in. deep
- Weight (lb): .3 lbs
- Tradeline Value: Tradeline
- Ambient Temperature Range (F): 32 F to 158 F
Honeywell’s AQ1000TP2 is a programmable thermostat designed to be used with an AQ2000 Series hydronic control panel to operate a hydronic system, a HVAC system or both. It displays both indoor and outdoor temperatures and incorporates the following functions:
A/F/AF regulation modes: The thermostat can control the ambient air temperature (A), the floor temperature (F) or the ambient air temperature with floor temperature limits (AF) (see page 19).
System Heat/Cool modes: The thermostat can activate a heating system or a cooling system. The thermostat can also be placed in the off position when neither heating nor cooling is required (see page 5).
Fan On/Auto modes: When the thermostat is used to activate a fan, the latter can be placed in Auto or On
mode (see page 6).
Programmable schedule: The thermostat can be programmed to use up to 4 periods per day. Each of the 28 periods for the week can have its own start time and temperature setpoints (see page 9).
Thermostat modes: The thermostat can be placed in any of the following modes (see page 4):
- In Hold mode, the setpoint must be set manually.
- In Run mode, the setpoint is adjusted according to the programmed schedule.
- The thermostat enters Temporary Hold mode when the setpoint is temporarily overridden while in Run mode.
- When the Unoccupied mode is activated by the hydronic control panel, the setpoint is set back by a predetermined temperature margin.
- When the Vacancy mode is activated by the hydronic control panel for further energy savings during periods of extended vacancy, the setpoint will be set to a lower value if the thermostat is in heat mode or to higher value in cool mode.
Readmore and Download Honeywell AQ1000TP2 Manual PDF
Title |
: Download Honeywell AQ1000TP2 Manual PDF |
Format |
|
Pages |
: 56 Pages |
Language |
: English |
File Size |
: 3 MB |