Introduction and Overview Phaser 3010/3040/WorkCentre 3045 Service Manual
The Phaser 3010, 3040 and WorkCentre 3045B/N incorporate a single-pass LED architecture, offering mono print speeds of up to 24/24-ppm, and resolutions up to 1200 x 1200 dots-per-inch (dpi). The Phaser 3010/3040 provides a 150-sheet Main Tray supporting specialty media, card stock, and envelopes. The Output Tray holds 100 sheets facedown. The WorkCentre 3045B/N combines a 1200 dpi scanner with LED printer to provide copy, scan and print functions. The 3045NI model adds an Automatic Document Feeder (ADF), G3 Fax modem, Ethernet interface and wireless capability to provide networked copy, scan, and Fax functions.
Technical Support Information
The Xerox Service Manual is the primary document used for repairing, maintaining, and troubleshooting the printer. To ensure complete understanding of this product, participation in Xerox Service Training is strongly recommended. To service this product, certification for this product is required. For updates to the Service Manual, Service Bulletins, knowledge base, etc., go to:
• Xerox Global Service Net - https://www.xrxgsn.com/secure/main.p
For further technical support, contact your assigned Xerox Technical Support for this product.
Service Safety Summary
For qualified service personnel only: Refer also to the preceding “Power Safety Precautions” on page xvi. Avoid servicing alone: Do not perform internal service or adjustment of this product unless another person capable of rendering first aid or resuscitation is present. Use care when servicing with power: Dangerous voltages may exist at several points in this product. To avoid personal injury, do not touch exposed connections and components while power is On. Disconnect power before removing the power supply shield or replacing components. Do not wear jewelry: Remove jewelry prior to servicing. Rings, necklaces and other metallic objects could come into contact with dangerous voltages and currents.
Read and obey all posted warning labels. Throughout the printer, warning labels are displayed on potentially dangerous components. As you service the printer, check to make certain that all warning labels remain in place. Safety Interlocks Make sure all covers are in place and all Interlock Switches are functioning correctly after you have completed a printer service call. If you bypass an Interlock Switch during a service call, use extreme caution when working on or around the printer.
The Phaser 3010/3040/WorkCentre 3045 Service Manual contains these sections:
Introductory, Safety, and Regulatory Information: This section contains important safety information and regulatory requirements.
Chapter 1 - General Information: This section contains an overview of the printer’s operation, configuration, specifications, and consumables.
Chapter 2 - Error Codes and Troubleshooting: This section provides detailed troubleshooting procedures for error messages and codes generated by resident diagnostics. Troubleshooting covers the operation of Power On Self Test (POST) and Service Diagnostics. In addition, this section includes troubleshooting methods for situations where error indicator is not available.
Chapter 3 - Image Quality Troubleshooting: This section focuses on techniques to correct image quality problems associated with the printer output.
Chapter 4 - Service Parts Disassembly: This section contains removal procedures for spare parts listed in the Parts List. A replacement procedure is included when necessary.
Chapter 5 - Parts List: This section contains exploded views of the print engine and optional Field Replaceable Units (FRUs), as well as part numbers for orderable parts.
Chapter 6 - Maintenance: This section provides periodic cleaning procedures for the printer. This section also provides procedures for the adjustment of print engine components
Chapter 7 - Wiring: This section contains the plug/jack locations and wiring diagrams for the printer.
Appendix - Reference: This section describes the operation of the CE Diagnostic software used to test Phaser 3010/3040 operation.
Read and Get Xerox Phaser 3010/3040 WorkCentre 3045 Service Manual PDF